Fixing a Garage Door Repair in Arlington TX can be a complex task and requires some technical knowledge and tools. However, with patience and proper guidance, it can be done effectively.
Step 1: Identify the problem The first step to fixing a Garage Door Repair in Arlington TX is to identify the issue. Some common problems that homeowners face with their garage doors include:
- The door does not open or close properly
- The door makes loud noise while opening or closing
- The door opener is not working
- The door is off its track
Step 2: Gather necessary tools Before you start fixing your garage door you need to have the right tools on hand. Some of the essential tools you’ll need include:
- Screwdrivers (Phillips and flat head)
- Adjustable wrench
- Pliers
- Lubricant
- Hammer
- Chisel
Step 3: Safety precautions Before you start working on your garage door, it’s important to take some safety precautions. Make sure to unplug the garage door opener and disconnect the door from the opener. This will prevent any accidental movement of the door while you’re working on it.
Step 4: Fixing an off-track door If your garage door is off its track, it means the rollers have come out of their tracks, and the door cannot move smoothly. To fix this, you’ll need to remove the door and then reattach it to the tracks. Here’s how to do it:
- Disconnect the door from the opener and remove any locks or bolts that hold the door in place.
- Lift the door and place it in a secure location, away from the tracks.
- Locate the brackets that hold the tracks in place and use a screwdriver to tighten any loose screws.
- Check the tracks for any damage, such as dents or cracks, and repair or replace them as necessary.
- Clean the tracks with a cloth and lubricate them with a silicone-based spray to reduce friction.
- Reattach the door to the tracks and reconnect it to the opener.
- Test the door to make sure it moves smoothly and is back on track.
Step 5: Fixing a noisy door If your garage door makes a loud noise while opening or closing, it’s likely due to worn out rollers or hinges. To fix this, you’ll need to replace the worn-out parts. Here’s how to do it:
- Disconnect the door from the opener and remove any locks or bolts that hold the door in place.
- Locate the worn-out rollers or hinges and remove them.
- Replace the worn-out rollers or hinges with new ones of the same size and type.
- Reattach the door to the opener and reconnect it to the opener.
- Test the door to make sure it operates smoothly and quietly.
Step 6: Fixing a door opener If your garage door opener is not working, it could be due to a power issue, a problem with the remote control, or an issue with the opener itself. Here’s how to diagnose and fix the problem:
- Check the power source and make sure the outlet is working properly.
- Replace the batteries in the remote control and test it again.
- If the problem still persists, you may need to replace the opener itself.
Step 7: Fixing a door that does not open or close properly If your garage door does not open or close properly, it could be due to a variety of reasons. To diagnose and fix.
South Arlington Overhead & Garage Door
3330 Matlock Rd #204, Arlington, TX 76015, United States
1-817-383-2173